Slide & Seal™

Introducing the next step in the evolution of the sliding door: the patent-pending Slide & Seal™ system, only from Pacific Architectural Millwork. The innovative hardware at the heart of the Slide & Seal™ automatically seals your door when you close it. When the panels reach the closed position, an independently-operating door bottom automatically drops and seals each panel with the surface of the floor, while a mechanism in the head track tilts the panels slightly outward, creating a weather-resistant enclosure around the perimeter.



The Slide & Seal™ improves upon Lift & Slide hardware in nearly every way:

  • No more bulky and expensive handles needed to operate each panel
  • No need to remove and store handles when you want to stack flush into a pocket
  • Adjustable hardware that allows for fine-tuning in the field and self-corrects for variations in the floor surface
  • Optional fully-automated panels that seal.

Crafted out of solid stainless steel and available in a variety of finishes, the proprietary H7100 handle remains recessed in the face of the panel until you press a tab at the bottom.  The counter-weighted handle then pivots and drops into the open position, allowing you to operate the panels comfortably.  And because each panel seals automatically, only one handle per lead panel is required for the entire system.




Slide & Seal AW6700
Aluminum w/Interior Wood Cladding Sliding View Wall (67mm thick door panel)
Download Product PDF

Automation System
Information about the Automation System for the Slide & Seal AW6700
Download Product PDF

Assembly and Installation Instructions
Information about the assembly and installation for the Slide & Seal AW6700
Download PDF

Slide & Seal AW6700

Max Frame Height:
12'
Min Panel Height: 60"
Min Panel Width:
31-1/2"
Max Panel Width:
108" (Depending on height/weight ratio)1
Max Glass Size:
60 sq. ft. (Depending on height/weight ratio)
Max Opening:
30' (larger openings available upon review)
Muntin Width:
1-1/4" standard (SDL)
Panel Thickness:
2-5/8"
Stile/Rail Width: 3-3/4"
Bottom Rail Width: 3-3/4"
Screen Thickness:
  • Aluminum - 1-3/4" (w/Kynar finish)
  • Wood - 1-3/4" (Panel Height<96")
  • Wood - 2-1/4" (Panel Height>96")
Screen Stile/Rail Width:
3-1/8" (aluminum screen)
Exterior Aluminum Finish:
  • Custom Color-Matched  Kynar™ (70%) finish (Standard)
    • Custom Metallic colors available
  • Clear/Bronze Anodized
Edge Detail:
Exterior aluminum: See drawing details
Interior wood: Traditional or Contemporary edge detail2

 

Notes:

1. For optimal panel performance, a height/width ratio of 2.5:1 or less should be used.

2. Contemporary Interior Edge Detail is REQUIRED when door panels have SDL.

 

The Slide & Seal recessed handle is crafted out of stainless steel and available in two finishes, both of which are suitable for coastal environments:

  • PVD Brushed Stainless
  • Painted Dark Bronze (Powder Coat)

Available finishes limited by handle styles.  Key cylinders optional. Custom hardware and handles are also available.

Our standard wood species are the following:
Pine Vertical Grain Douglas Fir Mahogany
Alternative and exotic wood species are also available

Standard glazing for the Slide & Seal is 1-1/4" overall tempered insulated glass. Custom glazing, impact and tinted glass are also available.

We offer two different edge profiles for the interior/exterior wood:

Contemporary Traditional

The Slide & Seal door can be purchased with custom options such as louvers and screens (aluminum or wood frame).

The standard bottom sill is the flush stainless steel track (3/16" projection above finish floor, not recommended for wood floors).  NOTE: Flush track is not warranted against air, water, or dust infiltration.

For improved performance, the Slide & Seal is also available with flush drain track option with adjustable-height interior step.  The drain cover is designed to be removeable for service or maintenance of the drainage tubes.

 

Contact Pacific Architectural Millwork for additional options and customization.

Download sample CAD drawings of Pacific Architectural Millwork products: